Skip to content

Aerospace and defense · Zoho partner in the USA · Los Angeles

Zoho for aerospace and defense suppliers, traced from heat lot to C of C

Built for tier 2, 3 and 4 machine shops and suppliers who answer to a prime’s quality clauses with a lean office.

Led from Glendale, close to the Southern California aerospace supply base, Elite Tech Global is a certified Zoho Advanced Partner that configures Zoho for small and mid-size US shops: RFQs and quotes in Zoho CRM, material lots and serial numbers in Zoho Inventory, travelers, inspections and NCRs in a Zoho Creator app, controlled documents in Zoho WorkDrive and quality sign-offs in Zoho Sign. Your compliance decisions stay with your quality lead and advisors.

Zoho Advanced PartnerCertified Zoho consultants for precision suppliers
You’ll talk to our senior team, not a call center.300+ projects · opened in Glendale in 2025

01Heard in quality offices

Where do small aerospace shops lose the paper trail?

Rarely on the machines. It happens between the quote, the purchase order, the outside processor and the box that ships, where a cert gets saved to someone’s desktop. Tap a card to see what changes once those records live in Zoho.

02One RFQ, start to dock

How does one aerospace order move from RFQ to shipment in Zoho?

Through seven handoffs, and your buyer sees only the emails. Below, a sample order plays out as messages between a customer’s buyer and your shop, and yellow notes show the Zoho record created behind each one. Scroll on and each step posts its messages and changes the card next to the thread.

Customer buyer and your shopSample thread · P/N SAMPLE-0420
  1. Step 1 · RFQ
  2. BuyerRFQ for SAMPLE-0420 Rev C, anodized, 250 and 500 pieces. The drawing is on our supplier portal.
  3. Zoho CRM RFQ logged on the customer account with part, revision, quantity breaks and due date; the drawing is referenced by number, the file stays on the portal
  4. Your shopGot it. We will quote both quantities with lead times.
  5. Step 2 · Quote
  6. Zoho CRM Quote Q-2290 built from the estimate: material, machine hours, anodize cost; the ops manager approved the margin
  7. Your shopQuote Q-2290 is attached, with both quantity breaks and our standard quality terms.
  8. Step 3 · PO review
  9. BuyerPO-55120 attached for 250 pieces. Please read the quality clauses; first article is required.
  10. Zoho Creator Contract review checklist: revision matches, flowdown clauses read, FAI flag set, sales order released to Zoho Inventory
  11. Your shopPO accepted. Rev C confirmed, FAI noted on the job.
  12. Step 4 · Material
  13. Zoho Inventory Bar stock bought from an approved supplier and received as heat lot H-23817; the mill cert PDF sits on the lot
  14. Your shopMaterial is in with its certs. Job J-5530 is on the schedule.
  15. Step 5 · Outside process
  16. Zoho WorkDrive Parts sent to the approved anodizer on a supplier PO; the returned process cert is filed to the job
  17. Zoho Creator Two parts with a cosmetic mark: NCR-071 opened, disposition rework, closed by quality
  18. BuyerAny issues with finishing?
  19. Your shopOne small NCR, reworked and closed. The record is ready if you want it.
  20. Step 6 · Inspection
  21. BuyerPlease send the FAI report before the parts ship.
  22. Zoho Sign FAI report generated from the inspection record and signed by the quality manager
  23. Your shopSigned FAI report attached for SAMPLE-0420 Rev C.
  24. Step 7 · Ship
  25. Zoho Inventory Shipment created; the C of C lists PO, part, revision, quantity, heat lot and process cert number
  26. Zoho Analytics Ship date recorded against the promise date for the on-time report
  27. Your shopShipped today. Packing slip, tracking and C of C are attached.
  28. BuyerThanks. Receiving has everything it needs.
  1. Step 1RFQ

    The request lands on the customer account

    Estimating sees every past quote for that customer and part number before pricing a new one. Quantity breaks, the due date and the drawing revision are fields on the deal, so nothing depends on reading back through an email chain.

    RecordRFQ deal with part and revision

    Zoho CRM

  2. Step 2Quote

    An estimate turns into a priced quote

    The quote is built from routing estimates: material, machine time by work center and outside processing. Below your margin floor it waits for a manager’s approval, then goes out on your template with your quality terms printed on it.

    RecordQuote with approval history

    Zoho CRM

  3. Step 3PO and contract review

    The PO is checked before anyone cuts metal

    A short review form compares the PO with the quote: revision, quantity, price, delivery date and the quality clauses the customer flows down. Only a completed review creates the sales order and the job.

    RecordContract review, sales order, job

    Zoho CreatorZoho Inventory

  4. Step 4Material

    Bar stock arrives with a lot number and a cert

    Purchase orders go only to suppliers on your approved list. At receiving, the heat or batch number goes into Zoho Inventory with the mill cert attached, and that lot is what the job consumes.

    RecordMaterial lot with mill cert

    Zoho Inventory

  5. Step 5Outside processing

    The anodizer sends parts and a cert back

    Parts leave on a supplier PO tied to the job. When they return, the process cert is filed in WorkDrive before inspection opens. A reject on the way becomes an NCR with an owner and a disposition instead of a sticky note.

    RecordProcess cert, NCR if needed

    Zoho WorkDriveZoho Creator

  6. Step 6Inspection and first article

    Measurements become a signed report

    Inspectors record each characteristic and the gauge used on a tablet form. For a new part or revision, the same data fills the FAI report in the layout your customer asks for, and the quality manager signs it in Zoho Sign.

    RecordInspection record, signed FAI

    Zoho CreatorZoho Sign

  7. Step 7Ship

    The box leaves with its paperwork complete

    The C of C is generated from the records above, so lot and cert numbers are never retyped. The ship date lands against the promise date, and Zoho Analytics turns those pairs into an on-time delivery view by customer.

    RecordShipment, C of C, on-time entry

    Zoho InventoryZoho Analytics

Sample order with made-up part, lot and document numbers. Your own routing, forms and customer requirements replace these during scoping.

03Traceability chain builder

Which record does each step of your part flow leave behind?

Every step should leave one record, linked to the step before it. Choose a sample part, switch steps on or off to match how you really make it, and the chain shows each record and the Zoho app that would hold it. It is a sample, and your quality manual sets the real list.

Sample part

Steps in this flow

Machined bracket: 7 steps, each leaving one linked record, held in 6 Zoho apps (Zoho CRM, Zoho Inventory, Zoho Creator, Zoho WorkDrive, Zoho Sign, Zoho Analytics).

Sample chain

    Drawings and technical dataRecords point to the drawing number and revision. If a drawing is ITAR technical data or CUI, the file stays in the environment your compliance advisor approves, and Zoho holds only the reference.

    Copies this chain into the contact form below. You review it there and decide whether to send it.

    04AS9100, ITAR, CMMC, DFARS

    Does Zoho make an aerospace supplier compliant?

    No software does, and we will never tell you otherwise. Compliance comes from your processes, your people and the assessments you pass. Zoho can hold many of the records those processes produce. Here is what each rule is, in plain words, and where the line sits between our setup and your advisors.

    AS9100

    What it is

    The quality management system standard used across aviation, space and defense, built on ISO 9001 with extra requirements such as configuration management, first article inspection and counterfeit part prevention. A registrar audits your whole QMS before certifying it.

    What a Zoho setup can hold

    Contract reviews, approved supplier lists, inspection and FAI records, NCRs, corrective actions and controlled document versions.

    What stays with you

    Your quality manual, internal audits, management review and the registrar’s decision.

    ITAR

    What it is

    US State Department regulations for defense articles and their technical data. They control who may access that data, foreign persons included, and where it may be sent or stored.

    What a Zoho setup can hold

    Business records that reference a controlled drawing by number and revision, plus a flag on parts and jobs your team marks as export controlled.

    What stays with you

    Deciding what is controlled, where that data may live and who may see it, with your export compliance lead or counsel.

    DFARS

    What it is

    The Defense Department’s supplement to federal acquisition rules. Clauses in your contracts, such as 252.204-7012, pass security and incident reporting duties down to suppliers that handle covered defense information.

    What a Zoho setup can hold

    A record of which flowdown clauses arrived on each PO, captured during contract review, so nobody misses one.

    What stays with you

    Reading the clauses, meeting them and deciding which systems are in scope.

    NIST SP 800-171

    What it is

    A federal publication listing the security requirements for protecting controlled unclassified information (CUI) in a company’s own systems. DFARS contracts point to it.

    What a Zoho setup can hold

    Nothing that counts toward these requirements on its own. We keep CUI out of the Zoho records we build unless your advisor has approved the environment.

    What stays with you

    Your system security plan, the controls and the scope of systems that touch CUI.

    CMMC

    What it is

    The Defense Department program that checks whether a contractor has the required security practices in place, at the level its contract names. For CUI, the level is built on NIST SP 800-171 and is checked by self-assessment or by an authorized third-party assessor.

    What a Zoho setup can hold

    Ordinary business records kept outside your CUI scope, which is how many small suppliers keep that scope small.

    What stays with you

    The assessment, the level you need and whether any cloud service sits inside that scope.

    Before any data goes into Zoho

    CUI and ITAR technical data may need an environment that meets those rules, and that decision belongs to your compliance advisor, not to us and not to a software vendor. We do not claim that Zoho is ITAR compliant, CMMC certified or FedRAMP authorized. Elite Tech Global is not a CMMC assessor and does not certify anyone. On the discovery call we ask which data is controlled first, then design the Zoho side around that answer.

    05Honest fit check

    When is a dedicated aerospace ERP or QMS the better choice?

    When your controlled data, scheduling depth or customer mandates outgrow a configurable suite. Zoho suits shops that need clean quoting, traceability and quality records without a large IT budget. Pick a job to see which side we would usually lean to, and we say the same on a call.

    Quoting and customer follow-up

    Zoho

    Zoho CRM handles RFQs, quantity breaks, approvals and quote history per part number with little training.

    Aerospace ERP or QMS

    Quoting modules exist, but sales follow-up and email history are often thin.

    Lot, serial and cert traceability

    Zoho

    Batch and serial tracking in Zoho Inventory plus a Creator traveler covers most job shop traceability.

    Aerospace ERP or QMS

    Also strong, often with genealogy reports built in, at a higher cost to buy and run.

    Finite capacity scheduling and full MRP

    Zoho

    A Creator schedule board works for a modest number of work centers, but it is not a finite scheduler.

    Aerospace ERP or QMS

    Built for multi-level BOMs, routings and capacity planning across many machines.

    Storing CUI or ITAR technical data

    Zoho

    We design Zoho records to reference controlled files rather than hold them, unless your advisor approves otherwise.

    Aerospace ERP or QMS

    Some are offered in environments built for controlled data, which your advisor can assess.

    NCRs, corrective actions and supplier approvals

    Zoho

    A Creator app shaped around your own forms and approval steps, changed when your procedure changes.

    Aerospace ERP or QMS

    Packaged workflows that are complete, but you adapt to their screens.

    A customer mandates a specific system

    Zoho

    Can sit beside the mandated tool for sales, documents and reporting.

    Aerospace ERP or QMS

    Use what the contract requires and connect Zoho only where it helps.

    If an aerospace ERP is the right answer for you, we will say it on the first call. Plenty of suppliers keep one for the floor and run Zoho for quoting, documents and reporting around it.

    06Six apps, six jobs

    Which Zoho apps does an aerospace machine shop use?

    Six, each with one clear job, and many shops start with two or three. They share customers, parts and lots, so a record entered in one shows up in the others. Swipe or use the arrows to walk through them.

    • 1 of 6

      Zoho CRM

      RFQs, estimates, quotes with approvals, customer contacts and quote history by part number. Zoho CRM setup

    • 2 of 6

      Zoho Inventory

      Sales orders, purchasing, heat lots and serial numbers, shipments and packing slips. Zoho Inventory setup

    • 3 of 6

      Zoho Creator

      The traveler, contract review, inspection forms, FAI, NCRs, corrective actions and supplier approvals, built around your procedures. Custom Zoho Creator apps

    • 4 of 6

      Zoho WorkDrive

      Controlled folders for work instructions, procedures and supplier certs, with version history and restricted access. Zoho WorkDrive

    • 5 of 6

      Zoho Sign

      Signatures on FAI reports, C of Cs, document releases and corrective action closures, each with a signing trail. Zoho Sign

    • 6 of 6

      Zoho Analytics

      On-time delivery by customer and part, NCRs by cause, quote win rate and supplier performance. Zoho Analytics

    The wider shop floor picture, from bills of materials to work orders for non-aerospace work, is on our Zoho for manufacturing page. If you would rather add a Zoho specialist to your own team, see hiring a manufacturing Zoho expert.

    07License cost

    What do the Zoho licenses cost for an aerospace shop?

    For a shop where only estimating and quality log in, a few separate apps cost little. Zoho One makes sense once the floor, purchasing and the office all need Zoho. Move the sliders to compare both on Zoho’s US list prices.

    Option ACRM, Inventory and Sign only

      Per month$0

      Option BZoho One, every employee

        Per month$0

        Option CZoho One, named users

          Per month$0

          Zoho US list prices per month before tax (yearly billing | monthly billing): Zoho CRM Professional $23 | $35 per user, Zoho Inventory Premium $79 | $99 per organization (the first plan with serial and batch tracking), Zoho Sign Professional $16 | $20 per user, Zoho One $37 (first-year price on zoho.com) | $45 per employee or $90 | $105 per named user. Option A leaves out Creator, WorkDrive and Analytics, which add to that bill and are priced once scoping shows which plans you need; Zoho One includes them. Setup work from us is priced on its own and fixed in a signed BRD.

          08Pick a starting link

          Zoho implementation packages for aerospace suppliers

          Each package adds links to the chain. Start at the quote if your floor paperwork already holds up, or start at traceability if a customer audit is what worries you.

          1. Quote Desk

            For shops whose RFQs and quotes live in inboxes and spreadsheets

            • Zoho CRM with RFQ intake, estimates and quote templates
            • Margin approvals and quote history by part number
            • Contract review form that turns an accepted PO into a sales order
            • Customers, contacts and open quotes imported

            Quote Desk carries one fixed fee, and the signed BRD names each quote template and approval rule we build.

          2. Where most suppliers start

            Trace Record

            For suppliers who need lot, cert and inspection records on every job

            • Everything in Quote Desk
            • Zoho Inventory lots, serial numbers and approved supplier purchasing
            • A Creator traveler with op sign-offs, inspection and FAI forms
            • C of C generated from the job and signed in Zoho Sign

            Our price for Trace Record is fixed when you sign the BRD, which lists every form and the fields each one records.

          3. Quality Loop

            For shops ready to run NCRs, suppliers and documents in one place

            • Everything in Trace Record
            • NCR, disposition and corrective action workflow with due dates
            • Supplier approval and scorecard records
            • Controlled WorkDrive folders and a Zoho Analytics on-time delivery report

            Quality Loop gets a single fixed fee in the signed BRD, and every workflow in it gets its own go-live date.

          There is no charge for the opening discovery call. Shops with years of job history, or more than one legacy system to unpick, sometimes need paid scoping ahead of the BRD, priced before any work begins. Earlier client work is collected on our case studies page.

          09How it starts

          How does a Zoho project start at an aerospace shop?

          With the data question first: which drawings, specs and records are controlled, and where they must stay. Only then do we map jobs and forms. Our Los Angeles team works with nearby shops by video and on-site visits when needed, and teams farther away, including suppliers in the Seattle area, work with us over video.

          1. Discovery callYour customers, part mix, current systems and the record that is hardest to find today.
          2. Controlled data mapWith your quality lead and advisor, we mark what stays out of Zoho and what may go in.
          3. BRD at a fixed priceForms, fields, approvals, imports and dates, written down and signed before we build.
          4. Build, test, go liveOne part family or one customer first, tested on recent jobs, then the rest of the shop.
          See every step from first call to go-live →

          10Supplier questions

          Zoho for aerospace and defense: questions from US suppliers

          AS9100 records, ITAR data, CMMC scope, lots and cost. Bring one traveler and one C of C to the call and the answers get specific fast.

          Is Zoho a good fit for a small aerospace or defense machine shop?

          For many tier 2, 3 and 4 suppliers, yes, as long as controlled data is handled first. Zoho CRM covers RFQs and quotes, Zoho Inventory covers purchasing, lots, serial numbers and shipments, and a Zoho Creator app covers the traveler, inspections, FAI and NCRs. Shops that need finite capacity scheduling across many machines, or a system a customer mandates, are usually better served by a dedicated aerospace ERP, with Zoho around it where it helps.

          Will Zoho make us AS9100 certified?

          No. AS9100 certification comes from an accredited registrar after an audit of your whole quality management system. Zoho can hold many of the records your QMS produces, such as contract reviews, supplier approvals, inspection and FAI records, NCRs and controlled documents, but your quality manager owns the system and the registrar makes the decision.

          Can we store ITAR technical data or CUI in Zoho?

          We do not set it up that way by default. Whether any cloud service may hold ITAR technical data or controlled unclassified information is a decision for your compliance advisor or export counsel. Our usual design keeps those files where your advisor approves and has Zoho records refer to them by drawing number and revision only.

          Is Zoho CMMC compliant or FedRAMP authorized?

          We do not make either claim, and we do not certify anyone; Elite Tech Global is not a CMMC assessor. CMMC applies to your company and the systems in its scope, not to one app. Many small suppliers keep ordinary business records outside the CUI scope, and your advisor decides whether that approach works for your contracts.

          Can Zoho Inventory track heat lots and serial numbers?

          Yes. Batch and serial tracking start on the Zoho Inventory Premium plan. We record the heat or batch number at receiving with the mill cert attached, carry it onto the job and the shipment, and print it on the C of C, so a lot can be traced forward to customers or back to the supplier.

          How do first article inspection records work in Zoho?

          Inspectors enter each characteristic, the measured value and the gauge used in a Zoho Creator form. For a new part or revision, that data fills an FAI report in the layout your customer asks for, which the quality manager signs in Zoho Sign. The signed report stays linked to the part revision and the job.

          How much would Zoho licenses cost a 40-person aerospace machine shop?

          With 3 estimators in Zoho CRM Professional, Zoho Inventory Premium and 2 quality approvers in Zoho Sign Professional billed yearly, the license bill is $180 a month: CRM $69, Inventory $79 and Sign $32. Creator, WorkDrive and Analytics would add to that. Zoho One for all 40 employees is $1,480 a month at the first-year price on zoho.com and includes them. Our own work is billed separately, at a fixed price set in the BRD you sign.

          Do you visit aerospace shops in Southern California?

          Yes. Led from Glendale, our Los Angeles team works with shops in the area by video and on-site visits when needed, for example when a walk-through of the floor helps. Suppliers in other states work with us over video, sharing a real traveler and C of C on screen.

          11Let’s talk

          Tell us what you’re building. We’ll map the fix.

          Book a 30-minute discovery call with Elite Tech Global. We review your Zoho, AWS, Shopify or WordPress setup, show where AI agents can save time, and agree the next step. If we work together, every requirement and a fixed price go into a signed BRD before the build starts.

          Real people, one team. Led by co-founders Ikramul Karim and Khris Kakosimidi, and a 40+ member team across Zoho, AWS and AI.

          Book a 30-minute discovery call

          Tell us a little and we’ll email you to set up the call.

          What can we help with?

          No spam. We use your details to reply about your project, and send occasional updates only if you tick the box above. See our Privacy Policy.